![]() Certain website features will be disabled or will not work as expected unless JavaScript is enabled. ![]() Some 3D-printed materials may be porous and more difficult to sanitize.Your web browser has JavaScript disabled which is required in order to properly use the website. The fitter can be reused, but should be thoroughly sanitized by submerging it in a disinfectant solution. When taking off the fitter, carefully remove it while avoiding contact with your eyes. If fitted properly, the mask material should move in and out when you breathe, and minimal air should escape around the edges of the fitter. Put the fitter over the mask, and check in the mirror to see that it matches the model in the app. If using unsecured material like a cloth square, you can hold it in place over your face. If using a surgical or face mask, put on the mask first. If you are using thin rubber bands, you can attach them to the hooks, and then make a chain to create a band that fits around the head. Avoid breaking the hooks that are used for holding the bands.Ĭreate an elastic band and attach it to the fitter. Plug the USB stick in the printer and follow the printer instructions to print it.Īfter printing the fitter, remove any extra support plastic and sand the surfaces so that they are smooth. gcode file and save it to a USB memory stick. Select “Add Support” and set Support settings as pictured.Ĭlick “Prepare” button to create a printer ready. Press “Lay flat” icon in the rotation tool to make sure the model stays flat on the printing surface.Ĭhoose PLA (or other material). This helps to create a smooth interior surface touching your mask. You can optionally rotate the model 180 degrees so the side with the hooks face down. Open the STL file and it will appear in the printer bed The process should be similar for other printers. The following description is for X-Maker from Qidi Tech, a FDM 3D printer, using the Qidi Print Windows app that comes with the printer. stl 3D model file that is supported by most 3d printing software. stl attachment on your computer.īellus3D software generates a. You can do this by choosing the email option, and then opening the mail with the. Press the "export" button in the bottom right to send the. In the bottom right corner, you can press the "Mask Fitter" button to generate the fitter model. Once the capture is complete, FaceApp will stitch together the various perspectives to form the 3D model. The application will prompt you to turn 90° to the left, then back to the middle, 90° to the right and then back to the middle. Hold a neutral facial expression (don't smile) for the duration of the scan. Once the oval turns green you can push the white button at the bottom of the phone display in order to initiate the scan. Position the phone directly in front of your face at a distance that causes the red oval to turn green. Launch the FaceApp application and select the FACE option. Remove glasses or anything else obscuring your face. Stand or sit in a stationary place so that you will be able to turn your head 90° to the left and right when you are ready to scan. Scanning with Bellus3D FaceAppĭownload Bellus3D FaceApp from the Apple App Store Scanning with an iOS device and Bellus3D FaceApp or Dental Pro, and exporting the fitter as an STL file is free.ģD Printing the mask fitter requires materials such as PLA plastic. Other filtering materials may work with reduced effectiveness, such as cotton cloth. It may also be possible to use elastic cloth or string.įilter Material: A surgical mask is preferred. We recommend a chain of thin rubber bands. To 3D print the fitter, you will need a 3D printer using material such as PLA plastic.īand Material: You will need material to create a band to hold the fitter in place around the head. If you are using an iPad Pro, you can scan using Bellus3D Dental Pro. You will need to scan the wearer's face using Bellus3D FaceApp, which requires an iPhone with a TrueDepth camera (iPhone X, Xs, Xs Max, XR, 11, 11 Pro or 11 Pro Max). Warning: While our fitter seems to improve the seal of a face mask, it has not been tested for effectiveness in preventing COVID-19, and you should use it at your own risk. The Loma Linda University School of Dentistry has worked with us on the development and testing of the Mask Fitter and have found that it enhances the peripheral seal of a mask. The mask fitter model can be generated with Bellus3D's face scanning app on an iPhone 11, iPhone X, or iPad Pro with FaceID capability. Bellus3D's Face Mask Fitter is a personalized 3D printed plastic frame that is contoured to the specific shape of a person's face to improve the seal of surgical or similar face masks.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |